Veritas Workbench Accessories

Veritas Bench Blade - Standard Post  (Ref: 212617)

So named because of their very low profile, they project only 6mm, above your bench top. A thumb-operated eccentric cam lever controls the sliding jaw, allowing you to secure work quickly. The jaw has a 6mm range of travel and applying up to 130kg of force. Flats on the cam provide secure stops at 3mm and 6mm of travel. The jaw face has a 5° inward cant to help hold a work piece securely. The cam and jaw are cast steel, heat-treated for surface hardness. The standard post version is for use in a 19mm (3/4") diameter through-hole (or blind holes at least 47mm deep).

£13.10

£15.72

Veritas Bench Blade - Wedge-Lock Post  (Ref: 212618)

The wedge-lock version is usable at any angle from horizontal to vertical. It will anchor firmly in a 19mm (3/4") diameter through-hole in material as thin as 16mm or in blind holes that are a minimum of 34mm deep.

£18.60

£22.32

Veritas Hold Down Clamp  (Ref: 500229)

Exceptionally high clamping forces
Arm pivots independently
Levered forces exerted downward
Fine grooves on post resist upward forces
200mm of clamping and throat capacity

Exceptionally high clamping forces can be obtained with this hold down. The arm is free to pivot independently, all levered forces are exerted downward, without any loss due to horizontal slippage from the canting action of the hold down post. The fine grooves on the post resist upward forces, yet still allow easy entry into a 19mm diameter hole. The 250mm hold down post gives you 200mm of clamping capacity, matching the 200mm throat capacity. Used vertically on the top of a bench, or horizontally in a side skirt.

£61.00

£73.20

Veritas Pair Bench Dogs  (Ref: 475715)

Made from solid brass rod so are non-corroding
Combined crosshatching and 2° slope face hold wood securely
Side spring slides cleanly and holds it well
Bench dog 110mm (fit 19mm hole)
For benches with tops up to 50mm thick
Ideal for use in bench sides
Works well with Wonder Dog Clamps

£19.10

£22.92

Vertitas Pair Bench Pups  (Ref: 475881)

Made from solid brass rod - non-corroding
Combined crosshatching and 2° slope face hold wood securely
Side spring slides cleanly and holds it well
Bench Pups at 60mm (fit 19mm hole)
For benches with tops up to 50mm thick
Ideal for use in bench sides
Works well with Wonder Pup Clamps

£16.00

£19.20

Veritas Bench Anchor  (Ref: 210539)

It is easiest to think of this as a barrel-shaped insert nut that secures in any 19mm(3/4") diameter hole, except this one self-anchors and is removable. Usable horizontally, vertically or at any angle in between, it accepts common 1/2" UNC threaded bolts, and will wedge in through-holes in material as thin as 16mm(5/8") or in blind holes 32mm deep. With pull-out strength of at least 90kgs in hardwood, the anchor has a wedging mechanism controlled by an integral hex-head screw drive and an external rubber O-ring that uses friction to hold it in place during installation. Though any 1/2" UNC threaded rod or bolt may be used with our bench anchor, we offer a small selection of flat-head and round-head fasteners here for convenience. The 27mm diameter washer, for use with round-head fasteners, increases the surface contact area of the head, made in Canada.

£7.50

£9.00

Veritas 25mm (1") Fastener Round Head  (Ref: 510540)

Veritas 32mm (1.1/4") Fastener Round Head  (Ref: 510541)

Veritas 38mm (1.1/2") Fastener Round Head  (Ref: 510542)

Veritas 50mm (2") Fastener Round Head  (Ref: 510543)

Veritas 27mm (1.1/16") Washer Round Head  (Ref: 510546)

Veritas 25mm (1") Fastener Flat Head  (Ref: 510544)

Veritas 32mm (1.1/4") Fastener Flat Head  (Ref: 510545)

Veritas 38mm (1.1/2") Fastener Flat Head  (Ref: 510547)

Veritas 50mm (2") Fastener Flat Head  (Ref: 510548)

Veritas Surface Clamp  (Ref: 701279)

Hold down, bench clamp, surface clamp - the functions the same just the name changes but true to form Veritas have taken an ordinary thing and made it much, much better - as well as a thing of beauty in brass and black satin. This fast acting surface clamp can be used anywhere you can drill a 19mm (3/4") diameter hole. The post has a wedging mechanism which anchors it firmly (horizontally or vertically) in material as thin as 16mm (5/8") provided it will resist the expansion of the wedge, making it the perfect companion for your jigs and sub-tables. The clamp arm slides easily for quick adjustment when tilted but locks firmly at 90°, with a reach of 54mm (2.1/8") it will also clamp up to a thickness of 95mm (3.3/4"). The combined forces of the wedge hold activated by the top screw, firm lock on the shaft ridges via steel pins and the generous clamp screw give you excellent hands free holding power.

£49.00

£58.80

Veritas Wonder Dog  (Ref: 202392)

Hugely versatile bench top fittings, which come in very handy for all sorts of jig and homemade clamping devices. Veritas Wonder Dogs are basically bench dogs with a length of threaded bar through the top, tommy bar one end and brass clamping face at the other. Dogs are 165mm. Dogs have a spring retainer. Above 38mm use Dogs. All that is required to mount them is a 19mm hole. Use for making: Long Clamps, Curved Work, Jigs, Unique Shapes, Bench Work.

£26.50

£31.80

Veritas Wonder Pup  (Ref: 202393)

Hugely versatile bench top fittings, which come in very handy for all sorts of jig and homemade clamping devices. Veritas Wonder Pups are basically bench dogs with a length of threaded bar through the top, tommy bar one end and brass clamping face at the other. Pups are 70mm. Pups have an O-ring. Below 38mm use Pups. All that is required to mount them is a 19mm hole. Use for making: Long Clamps, Curved Work, Jigs, Unique Shapes, Bench Work.

£22.50

£27.00

Veritas Bench Stud  (Ref: 210535)

strength of the material) and in blind holes 32mm (1.1/4") deep. Place the wedge in the hole and rotate the toggle bar until the wedges lock in the hole. The 125mm (5") long stud has 1/2-13 UNC threads and provides an overall clamping capacity of 103mm (4.1/8") using the supplied wing nut.N.B. The 1/2-13 thread offers enormous mechanical advantage, and is fully capable of drawing the post out of the dog hole, even if it has been tightly locked in place. Do not over-torque the wing nut due to the immense force applied.

£22.20

£26.64